U PVC Clad Tape

Installation /Application Manual

Step 1: Prepare the Surface Make sure the surface is clean, dry, and free of dust, debris, and oil.
Step 2: Measure and Cut Measure the length of U-PVC Clad tape needed to seal the area and cut the tape to the desired length with a sharp utility knife or scissors.
Step 3: Peel off the backing paper Carefully peel off the backing paper of the U-PVC Clad tape to expose the sticky side.
Step 4: Position and Paste Position the U-PVC Clad tape with the sticky side exposed over the desired area. Press down firmly to ensure proper adhesion.
Step 5: Repeat as needed Continue applying the tape along the seam, joint or overlap to be sealed, making sure to overlap the tape sections slightly to obtain a secure, continuous seal.


Properties Values
U-PVC GSM 700 ± 5%
Thickness (mm) 0.5 ± 5%
Tensile Strength (Kg/cm') >400
Adhesive type Acrylic-PSA